Press Releases & Publications
Live Demo at EMC 2017 [ July 31, 2017 ]
See the Live Demo at the EMC show booth 321, August 8 - 10
New simplified test setup and industry first scalable power amplifier architecture
Empower RF Systems is conducting remote live demonstrations of our broadband, high power 1KW 1 to 3 GHz amplifier, Booth 321.
The amplifier will be housed in Los Angeles and viewed in the IEEE EMC exhibit venue with live streaming video while remotely controlling the amplifier from the exhibit floor through a standard web browser. What you will see is a demonstration of remote operation of the Empower 2170 1KW RF amplifier in a test setup that includes a signal generator, spectrum analyzer, external power meter, and load, simulating various test and modulation scenarios.
"Empower is bringing the element of portability to high power RF amplifiers with small size that allows these amplifiers to be conveniently shipped for offsite testing and moved around as needed within your test environment."
In addition to industry leading size / weight / power performance, the demonstration team is eager to talk about industry first capabilities that will change the way you test.
Simplify Your Testing. Why?
Speeding up your Radiated Immunity sweeps while using fewer external instruments with our ALC mode will save you money. You simply communicate a command to the amplifier for the desired output power required - never mind adjusting for the roller coaster output vs frequency curves of old technology amplifiers. Here’s how it works: set the sig gen frequency with power level +/-3dBm and leave it, tell amp the power out you want, read field probe V/m, calculate, tell the amp the power you want. Repeat. By instructing the amplifier to maintain a specific power level, the desired E field can be reached with an order of magnitude fewer incremental power steps. Be sure to stop by the booth to get more specifics on accomplishing shortened test times.
Scalability. What is it?
We developed this industry first scalable architecture as way to supply a large variety of output power levels to many different customers and application, but with only one fundamental design effort from our engineering group. The benefit to you is reducing your lifetime capital spend on amplifiers since you buy only the power you need today and add power amplifier blocks later when your test or application requires more output power. Adding 3U power amplifier blocks is accomplished easily and simply with no factory return or special handling for phase matching required.
November 23, 2018
October 8, 2018
July 26, 2018
June 5, 2018
April 23, 2018
January 23, 2018
November 17, 2017
September 25, 2017
July 31, 2017
May 16, 2017
May 16, 2017
March 2, 2017
October 27, 2016