TECHNOLOGY FAR BEYOND WHAT IS CURRENTLY AVAILABLE

Watch our live video at the EMC Symposium in Santa Clara with CEO Jon Jacocks showing our 2170 1KW 1 to 3.1Ghz Power Amplifier and discussing the major technological breakthroughs found in this amplifier.

Output power density in our solid state GaN 1 to 3.1Ghz 1KW CW Amplifier far exceeds anything else available and brings the convenience of portability to the market. And, if that isn't enough achievement, the unit is also packed with measurement, monitoring, and control features not found in any other mass produced RF power amplifier.

SKU 2170 Features include

Simplify Your Test Setup

• Instrument grade metering for forward and reverse power monitoring thereby eliminating the cost of external DDC, power sensors, and power meter
• Small size allows amplifier to be moved around as needed in your test environment
• Operate from your Smart Wifi device, Lan, or Front Panel

User Selectable Output Power Control

• Automatic Gain Control (AGC) - Utilizes internal feedback for flat output across the band
  With selectable Peak or RMS detector
• Automatic Level Control (ALC) - when input signal varies, maintain linear user defined output (not to be confused with a clipping limiter)
  With selectable Peak or RMS detector
• Manual Gain Control (MGC) - Amplifier runs like a typical amplifier in open loop

Measurement Modes

The instrument will read the proper power level for your modulation type

• CW. CE (constant envelop modulation), FM
• AM modulation
• Digital Modulation- RMS detection mode, user inputs PAR (peak to average ratio)
• Multi-carrier / Multitone
• Pulse Modulation

Other Features

• LXI interface
• Built in web server for Lan or wifi operation with your smart phone or tablet
• Tile driver available
• Multitone enabled for faster radiated immunity sweeps
• Designed for automotive 600V/m
• Ideal TWT replacement

For more information about our Next Generation Systems »

For more information about our System Software »

For more information about SKU 2170 Live Demo at MTT-S IMS trade show »

Remote Management & Diagnostics

Our state of the art user interface allows the user to control and monitor the configuration, behavior, and real-time health of the amplifier through a wireless device, Ethernet connection, or front panel. Wireless operation is quick and easy, all you need is the units IP address and its plug and play from your favorite browser. For machine to machine interface (M2M), Empower offers TCP/IP or UDP protocol sockets accessed through the Ethernet port. This is a new and unique feature of Empower's current generation "size matters" RF amplifiers and allow you unprecedented reporting capability.

Ease of Use GUI for Fast and Intuitive Control and Monitoring

Dashboard
• Snapshot overview and selectable configuration modes for common amplifier controls
System Overview
• Graphical block diagram of major system functions for at a glance assurance
System Monitoring
• Monitoring input and output of internal power blocks and power supplies plus self-protection indicators and associated Forward Power, Reverse Power, VDD, IDD, and Temp.
Commands/Control
• Control Standby mode, Set output power mode, output level, and input modulation type
Log Book
• Automated self-reporting of control/commands and alarms